Home > Maximum Motorsports > Swaybars >

  Maximum Motorsports Swaybar End Link Kit for 94-04 Mustangs
Swaybar Endlinks Mustang Maximum Motorsports


 
Our Price $39.95


Availability: Usually Ships in 24-48 Hours
Product Code: 1675
Qty:

Product Details
 
Product Details
  • What do swaybar endlinks do? The loads between the control arm and the swaybar pass through the end link, pushing and pulling on it. To reduce bending loads on the end link, the loads must be acting along the length of the end link. The further away from vertical the end link is, the greater the bending loads on it.

  • Why is an endlink upgrade a good idea? When lowering a car, the swaybar rotates, pointing the ends of the swaybar arms upwards, and tilting the end links away from vertical. Moderate lowering does not tilt the end link enough to cause a significant problem, but dramatic lowering does. Installing a shorter end link rotates the swaybar so that the swaybar arms no longer point upwards.

  • Product specifics Replace the original weak front swaybar end links, which are prone to bending and breaking, with these end links made with 3/8” diameter, grade 8 bolts. Features 5" overall length and is recommended for Mustangs with stock ride height. Each end link set includes new washers and urethane bushings-everything needed to connect the front swaybar to the control arm.

  • Fitment notes. Shorter end links should also be used with the MM K-member because the raised control arm pivots of the MM K-member reduce the distance between the swaybar and the control arm. A stock length end link will rotate the swaybar and point the ends of the swaybar arms upwards, increasing the bending load on the end link.

    Fits 1994-2004 Mustangs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Maximum Motorsports > Swaybars
Sway Bars