Home > Bushings >

  Prothane Front Control Arm Hydro Bushings for 96-04
MM Control Arm Hydro Bushings for 96-01 Mustang


 
Our Price $59.95


Availability: Usually Ships in 24-48 Hours
Product Code: 1678
Qty:

Product Details
 
Product Details
  • Urethane front control arm bushings are full floating and nonbinding. In the front they maintain proper camber and caster alignment and give quicker turn-in response. These are a great upgrade for tired, soft, and worn out original rubber bushings that may never have been replaced! These bushings fit HYDRO-BUSHING shells, NOT the standard bushing models. See notes below. The shell inside the control arm is different, and requires a different bushing.

    FITMENT NOTES
  • These bushings are installed into the factory bushing "shells" in your OEM control arms, after all the rubber has been removed. Don't remove the bushing shells when installing these bushings.
  • You must check your bushings to determine if they are standard bushings or Hydro-bushings. To determine the type of bushings in your front control arms, use a screwdriver to pry on the metal flange of the rearward bushing of the front control arm. If the metal flange is rigid and is one piece with the pressed-in metal shell, you have standard bushings. If the metal flange is movable and independent from the pressed-in metal shell, you have hydro-bushings.

    Fits 96-04 Mustangs with hydro bushings only

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Bushings
Prothane